Hi All,
I have been trying to access one of my AP (Ruckus R720), which before this was working fine. When I tried to SSH to said AP, it gave me this error ;
SSH "Network error: Connection Refused"
And so, next step, I did a hard reset using the button, these are the steps that I did ;
Held the reset button down for 20 seconds.
Red light blinks - I release the button after 30 seconds.
Unit reboots, power is solid green ctrl is blinking green.
I see in my switch that the AP got IP.
My next step :
C:\Users\Rashid>ssh 10.110.193.161
ssh: connect to host 10.110.193.161 port 22: Connection refused
C:\Users\Rashid>ping 10.110.193.161
Pinging 10.110.193.161 with 32 bytes of data:
Reply from 10.110.193.161: bytes=32 time=4ms TTL=63
Reply from 10.110.193.161: bytes=32 time=5ms TTL=63
Reply from 10.110.193.161: bytes=32 time=4ms TTL=63
Ping statistics for 10.110.193.161:
Packets: Sent = 3, Received = 3, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 4ms, Maximum = 5ms, Average = 4ms
Tried SSH again, failed. And the AP is Ping-able.
SSID : Configure.Me-163690 is up.
Can connect to the "Configure.Me-163690" SSID using serial number as password.
Since I didnt get any IP, I set my wifi AP to static to be same as the range of the AP.
10.110.193.xx and tried to access the webui using the IP 10.110.193.161 - Failed.
Tried again with different static IP range ; 192.168.0.xx and tried to access the webui using the IP 192.168.0.1 - Failed.
Any way for me to access this AP? or to rectify this issue ?
Thank you in advance.
