RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
04-07-2024 10:57 PM
Hi Guys,
I need some help, i am using an ICX 8200 with an ver 10.0.00T253
i am trying to have 2 vlans with different ip subnet to access internet
vlan 10 - internet accsess with using home broad band router (192.168.8.0/24)
vlan 20 - 20.0.0.0/24
& i can rich vlan 10 interface ip through vlan 20 (20.0.0.10/24). But i can not access internet
below is my config, did i miss or do anything wrong over here?
global-stp
!
!
vlan 1 name DEFAULT-VLAN by port
spanning-tree
!
vlan 10 by port
untagged ethe 1/1/1
spanning-tree
!
vlan 20 name test by port
untagged ethe 1/1/2
spanning-tree
!
ip route 0.0.0.0/0 192.168.8.1 distance 254
!
ip tftp blocksize 8192
!
interface management 1
!
interface ve 1
!
interface ve 10
ip address 192.168.8.2 255.255.255.0
!
interface ve 20
ip address 20.0.0.1 255.255.255.0
!
--------------------------------------------------------------------------------------------------------------------------------------------------
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 20.0.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 20.0.0.1
Wireless LAN adapter WiFi:
C:\Users\Admin>ping 192.168.8.2
Pinging 192.168.8.2 with 32 bytes of data:
Reply from 192.168.8.2: bytes=32 time=1ms TTL=64
Reply from 192.168.8.2: bytes=32 time=1ms TTL=64
Reply from 192.168.8.2: bytes=32 time=1ms TTL=64
Reply from 192.168.8.2: bytes=32 time=1ms TTL=64
Ping statistics for 192.168.8.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
04-08-2024 07:34 AM
Hi Suheera
Thank you for reaching us
Try to do a traceroute to 8.8.8.8 from switch and check where it is dropping the packet , Try troubleshooting on that device.
Also for 8200 10.0.00 flat version is not recommended. Please get the 8200 switch version 10.0.10c.
Thanks
04-10-2024 02:30 AM
Hi chandini
04-11-2024 09:40 AM
Hi Suheera
Thank you for reaching us
Could you help us with below details
Thanks
