I have one ICX 7150-C12P switch that is connected to my R650 APs. The C2 port is connected to my router (pfSense). The C1 port is connected to a second ICX 7150-C12P at the second switch's C2 port.
Firmware is up to date on both 650R's and I'm running version 09010b on both switches (the sps firmware, not the spr firmware).
The first swtich (directly connected to the access points) always shows up in Unleashed, even after the firmware update. The second switch (which is connected to the first switch via the C ports) will ONLY show up in Unleashed after I do a factory reset. As soon as I restart the second switch (via CLI, pulling the power, etc), it never returns to Unleashed. Unleashed always shows it as "connecting", but it never does.
I've reset the offending switch via CLI, the reset button, flashing firmware, etc. The behavior Is always the same. I'm able to access both switches via their ip address (DHCP static lease).
I'd really appreaciate any help.
Yes, everything is on a single network (192.168.0.xxx)
Both switches are running firmware: 09.0.10bT211
! Startup-config data location is flash memory ! Startup configuration: ! ver 09.0.10bT211 ! stack unit 1 module 1 icx7150-c12-poe-port-management-module module 2 icx7150-2-copper-port-2g-module module 3 icx7150-2-sfp-plus-port-20g-module stack-port ethernet 1/3/1 stack-port ethernet 1/3/2 ! ! ! ! ! ! ! ! ! ! ! ! hostname Ruckus-ICX7150-C12P-slave dynamic
ip dns domain-list gands.lan dynamic ip dns server-address 192.168.0.1(dynamic) ip address 192.168.0.3 255.255.255.0 dynamic ip tftp blocksize 8192 ip default-gateway 192.168.0.1 dynamic ! ! ! interface management 1 ! ! ! ! ! ! ! username admin password ..... ! aaa authentication login default local ! aaa authentication web-server default local ! aaa authentication snmp-server default local ! logging host 192.168.0.4 udp-port 6514 !
! ! ! no telnet server ! manager registrar manager port-list 987 ! cli timeout 0 ! ! end
No VLANs, just a single network until I can get this resolved. Presently, everything is running on 192.168.0.xxx. My router is DHCP-ing everything, and I've given the router, both switches, and both access points static leases.
I allowed Unleashed to configure both switches after a factory reset. The first switch (where the APs are directly plugged in) shows up fine. The second, connected via the C1 and C2 ports, is the one that won't recorrect in Unleashed.
I still don't understand why Unleashed manage ICX
Usually Unleashed manage other Unleashed
1. what Unleashed can manage for ICX
2. What is benefit of doing that
I believe Unleashed has small cpu ram hd