04-15-2021 06:25 AM
It seems that the Unleashed "firmware check" OTA site is down or something ? (error message shown when the "upgrade" button is pressed )
04-15-2021 10:06 AM
When Clicking upgrade it is downloading and upgrading OTA from Ruckus site. See the below screenshots and try again.
Finally with message "The new firmware has been successfully downloaded. Please click the Reboot button to finish upgrade."
04-15-2021 10:52 AM
Hi, karthik: when click "Upgrade" in the side bar, it doesn't show my current version, it shows "no available versions" instead.
when click "Check for Updates" it pops up a error message
I think the logic here should be "it doesn't get current installed firmware version" in the first place, so it can't compare the version between both side to determine if newer version available, then the warning message pops up.
so the problem should be why it can't get current firmware version that used to be showing. weird ....
04-16-2021 04:20 AM
What model of AP you have? Is it supported with latest Unleashed firmware?
If yes, than try download the latest firmware and upgrade locally, this may fix and issue.
04-16-2021 05:35 AM