cancel
Showing results for 
Search instead for 
Did you mean: 

CPU at 100% sometimes

luciano_alabama
New Contributor II
Hello all,

is that normal use of our ZoneDirector 3000 ? 

We have some bad experiences with our wifi since the past few days and I saw that the CPU is sometimes at 100%, which is not normal on my mind...

Is that the ZD3000 is ok for 229 APs and almost 800 clients ?

Thanks a lot for your help guys 😃

Have a good day.Image_ images_messages_5f91c3d8135b77e2478abc49_a7e54fd40833b19903ec061c36aa5601_RackMultipart20170420601991q8b-5b09dc0b-972c-458a-a128-1b25841580bf-1197774176.png1492674534
10 REPLIES 10

gupta_pallapot1
New Contributor III
Check the uptime and firmware version running on the ZD3000.

luciano_alabama
New Contributor II
Firmware version : 9.12.0.0 build 336
Uptime : 202d 17h 54m

gupta_pallapot1
New Contributor III

phillipsca
New Contributor III
That's bizarre. We are running from a 3000 v9.9.0.0 build 216. Today we have a large event with just under 400 hosts across 9 SSIDs. We route all traffic back via the ZD too. My CPU is running at c. 10%. Capture below.Image_ images_messages_5f91c431135b77e2479b1626_d5da3e96b50647686615e8c24413040c_RackMultipart2017042058851ursn-49dde036-334a-4625-a316-8e424ad30f68-1021542561.JPG1492682393