Sorry, i accidentally pressed save. I have R500 and VSZ 184.108.40.206.208. The right firmware in order for the AP to work with the VSZ is 220.127.116.11.329. However, i mistakenly update firmware which i believe to be Unleshed ( firmware R500_18.104.22.168.312.bl7).
I have pressed the reset button for 20 seconds but the AP still broadcast configure.meXXXX and i can't access to unleshed.ruckus.com or https://192.168.0.1.
is there any other way to reset the AP?. If possible can show me which download file for the firmware 22.214.171.124.329.
AP does not broadcast the configure.me SSID always, it only broadcast it when you are configuring the master AP in the network. The moment you will get done with the configuration of the unleashed setup then you will not get any configure me SSID.
Since you have done the factory reset, the AP is in setup mode.
You can access the AP by connecting the AP to the Configure.me SSID and access unleashed.ruckuswireless.com. Or connect through the LAN and access 192.168.2.1.