unleash r510 AP from zonedirector

[mikime]

Dear Ruckus

We have this Zoneflex R510 that we would like to release it from the zone director (that die last week) and reset to factory reset

trying this guide here didnt help/work greeting the old controller config

please your help

[sanjay_kumar]

Hi @mikime 

After the factory reset, on which IP does the AP coming up with? Default IP 192.168.0.1 or configured IP\DHCP?
Login to the CLI and try the command "set factory" this should reset the AP of the reset pin is not helping.
Now the AP should respond on the default IP 192.168.0.1, if not it might obtain an IP from DHCP if it is reachable.

Once done, login to the AP CLI and share the output of below command from AP CLI:
get director
get wlanlist

[mikime]

it will be great if someone from Ruckus team response

for working factory reset guides etc..

Please your help

[syamantakomer]

Hi @mikime,

We do have clear contents available for factory reset procedure.

Refer the below self-help article.

https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/How-to-factory-reset-or-factory-default-dif... 

If still facing the issue, then please open a support case for further assistance.