cancel
Showing results for 
Search instead for 
Did you mean: 

remote AP and ZD configuration

shantha_swaroop
New Contributor III


 

HO Network                                                       Remote Network

IP Schema 10.10.0.0/21                                                            192.168.63.0/24   Router  IP192.168.63.21 ( DHCP running in the router)       

WLAN  VLAN 104 controller IP 10.10.104.1                         NO VLAN; default VLAN 1

Management VLAN 104                                          

 

 The AP is able to get the IP address under 192.168.63.0/24 subnet, the controller in the HO detects the Access point and pushes the configuration and it ends with a log ap reset due to country code change,, and there after the AP stops fetching the DHCP from the remote router.


Can someone throw light in this kind of scenario.


0 REPLIES 0