So, lucky to find that tools. Thank you for the support. But I have a question about it. I really know how to read the log, especially for clients log. Is there any help/guide so I can be able to read the log?
I still don't know how to exactly read the detail about the log information, like below:
XTlimits indicates how many times packets exceeded the
holding time limit. If the AP can't dequeue the packet before holding time
expires (these holding time limits are different for different types of traffic
meaning, data, background, video, voice) it will drop it.
XTlimit value is significant in the support info. All queue columns showing
some major figures, usually indicates too much interference or too much
incoming data from the wire side.
Look for too much broadcast traffic on the network, and how big is the
broadcast domain, and what type of clients are on the network?
If interference on the radio band doesn’t look bad, it may be wire traffic
driving client queue limits to max.