cancel
Showing results for 
Search instead for 
Did you mean: 

clients can't access network after leaving building and coming back

greg_tompkins
New Contributor
Hi Everyone,

I'm trying to troubleshoot why when clients come back to our network the wireless still looks like it's connected but they cannot access the network again until disconnect and reconnecting. Thank You
3 REPLIES 3

andrew_giancol1
Contributor III
Hmmm...what platform / Version are you using? ZD, SCG, Unleashed?

That'll help others answer your question.

Good luck!

greg_tompkins
New Contributor

ZoneDirector  ZD3050

Thanks

victor_cenac
Contributor
It sounds like a DHCP issue. There is a setting in the ZD to force disconnect the client if no DHCP is acquired in (enter your time). We do 10 seconds. That way, the client is forced to reconnect and it will ask for a new lease.