cancel
Showing results for 
Search instead for 
Did you mean: 

block a client

giovanni_barbag
New Contributor

Hello.

I have a couple of zone director 1200 in Smart Redundancy configuration and about 50 AP.

We would like to block a supected client from our wi-fi enviroment.

We have the mac address of it but after it leaved the wi-fi, we don't see it on active/non-active client list  of ZD1200, for this I cannot  block it from web interface. there is another way?

Giovanni

1 REPLY 1

syamantakomer
Community Admin
Community Admin

Hi Giovanni,

Globally blocking a client is only available from GUI and only when client is connected to the network.

Once you block the client from GUI, it is added to a global ACL which is set to deny all and you cannot modify it from CLI.

Here is a similar past discussion.

https://forums.ruckuswireless.com/conversations/unleashed/block-a-client-unleashed-cli/5f91c3fd135b7...


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn