acces point R300

[marc_overbeek]

I can log in after hard reset with 192.168.0.1 and can enter the name ( super ) and password ( sp-admin ) after that the page stays blank?

With refresing sometimes the nam of the device pops up but that is it! Anyone a solution?

[sunny_gupta]

You may be able to do this through the GUI, unless the functionality is broken somehow since you have limited settings.  Here is the link for FW: https://support.ruckuswireless.com/software/1015-zoneflex-r300-indoor-ap-104-0-0-0-1347-ga-software-...

Otherwise you may have to do it via SSH/CLI and use a TFTP server.

[marc_overbeek]

Downloaded firmware but the upgrade button doesn't work..

[sanjay_kumar]

Hi @marc_overbeek 

Follow the below article for upgrading the AP from CLI.

https://support.ruckuswireless.com/articles/000001551

https://support.ruckuswireless.com/articles/000006260

Regards,

Sanjay Kumar

[syamantakomer]

Have you tried Firefox?

Try once and confirm if that helps or not.

[marc_overbeek]

Yesterday I've tried it with a windows machine and it worked the first time with Chrome. So problem solved! First time that Windows does what Mac could not.... )-;   Thanks everybody for the support!!