cancel
Showing results for 
Search instead for 
Did you mean: 

acces point R300

marc_overbeek
New Contributor II

I can log in after hard reset with 192.168.0.1 and can enter the name ( super ) and password ( sp-admin ) after that the page stays blank?

With refresing sometimes the nam of the device pops up but that is it! Anyone a solution?

9 REPLIES 9

You may be able to do this through the GUI, unless the functionality is broken somehow since you have limited settings.  Here is the link for FW: https://support.ruckuswireless.com/software/1015-zoneflex-r300-indoor-ap-104-0-0-0-1347-ga-software-...

Otherwise you may have to do it via SSH/CLI and use a TFTP server.

Downloaded firmware but the upgrade button doesn't work..

Hi @marc_overbeek 

Follow the below article for upgrading the AP from CLI.

https://support.ruckuswireless.com/articles/000001551

https://support.ruckuswireless.com/articles/000006260

Regards,

Sanjay Kumar

syamantakomer
Community Admin
Community Admin

Have you tried Firefox?

Try once and confirm if that helps or not.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

marc_overbeek
New Contributor II

Yesterday I've tried it with a windows machine and it worked the first time with Chrome. So problem solved! First time that Windows does what Mac could not.... )-;   Thanks everybody for the support!!