cancel
Showing results for 
Search instead for 
Did you mean: 

Zonedirector + transmit power settings

jamie_walmsley
New Contributor III
Hi,

Can somebody explain to me how the transmit power settings are calculated on a ZD?

For instance, lets say I have a 7372 currently set to 1/4 power on 2.4ghz.

Is that 1/4 power of the legal limit of the country I'm in? (UK - so 100mw) or is that 1/4 power from the maximum RF output as specified on the spec sheet , which for the 7372 is 26dbm for 2.4ghz?

basically Im trying to work out how this equates to the EIRP for coverage planning purposes.


Thanks,
3 REPLIES 3