I have an Zone Director 1100 with this Version 184.108.40.206 build 8 (fresh out from the box) and a few AP ZoneFlex 7352. Manage to Approve this model in my zonedirector but have an error saying "Model[zf7352] is not supported for Ethernet port configuration." i been advice to upgrade my zonedirector firmware but when i reach the support website it require a premium support. But would updating my firmware really solve this problem? i really can't pay if it still have the same problem.
The 7352 requires a minimum version of ZoneFlex software (9.5.1 if memory serves). You can register your new products at https://support.ruckuswireless.com/re... and the website will upgrade your account to Premium status for the remainder of your software warranty (which is ~90days from shipment +-). That should take care of you for this situation, but once the warranty runs out your account will revert back to guest status.
The WatchDog support program provides both advance replacement on your controller as well as technical support access and software upgrades so I do recommend you look into that.
hi am experiencing some kind of same problem as you, can you help me out in installing my ap7352 with the zone director such that all the aps broadcast same ssid throughout the coverage area. Thank you