Zone director 1200
R710 AP's
Juniper Switches
Vlan 1 - management VLAN - no DHCP, everything is manual IP addresses.
I have VLAN 40 setup for internal network - DHCP on main server - wireless clients work
I have VLAN 30 setup for Guest network - DHCP on a Mac OSx server - wireless clients are not getting IP addresses from DHCP
If I hook the laptop I am using for testing into a port untagged to VLAN 30 using an ethernet cable, DHCP works and I get an IP address.
AP's are in ports untagged to management (1) and tagged to 30 and 40.
ZD is in a port untagged to management (1) and tagged to 30 and 40 (I don't think I need the 30, 40 tags but added just in case)
DHCP server is in port untagged to 30.
If I do a ipconfig /renew on the laptop I do get a message that it is unable to contact the dhcp server, request has timed out. What am I missing here?
