cancel
Showing results for 
Search instead for 
Did you mean: 

When is SmartMesh for the T300 available?

morgan_finucane
New Contributor II
Have a network where there is an 11g bridge that needs to go. Awaiting SmartMesh on the T300 to solve the issue. as the 11g bridge is bottlenecking everything on the far side.
9 REPLIES 9

john_d
Valued Contributor II
See https://forums.ruckuswireless.com/ruc...

Michael, an official rep, said that it should be coming in 9.10 (aka 9.9.1) and it's probably a year out if not more. Not sure if you want to wait that long.

morgan_finucane
New Contributor II
Thanks John. According to the Ruckus Feature Sheet on SmartMesh it seems it is supported on all Zoneflex Smart Wi-Fi AP's?

I can't wait that long TBH. I've also got issues with R700 as well. Seems it is a bit of a minefield with feature sets not available across the range.

http://c541678.r78.cf2.rackcdn.com/fe...

john_d
Valued Contributor II
If you look at the pictured products, it's a 7363, so that information was likely accurate two or so years ago but not since Ruckus introduced the R700.

I too would love to have AC meshing sooner, but as a home office buyer I have virtually no influence 🙂

jay_tarbox
New Contributor II
Any update on this? It should be available pretty soon?