WLAN Accesspoint DHCP over VPN

[tobias_hanschen]

Hello,

I have a main office and a branch office connected via VPN.

In the main office I have a ZoneDirector 1112 with several Ruckus R500 Accesspoints in use.

Now i want to install a Ruckus R500 Accesspoint in the branch office.

I configured the firewall, to connect the Branch Accesspoint with the Zonedirector. This works.

But now, i have the problem, that the client gets no IP-Address from the DHCP-Server in the main office.

The DHCP-Server in the main office is in VLAN 1 on 99.999.1 - Subnet. The Zonedirector is in the 99.999.76.-Subnet. On the HP-Switch the VLAN 300 and VLAN 425 are tagged.

On the Zonedirector i have configured a WLAN-Group "Branch_WLAN" and a WLAN "Branch_Test". In the WLAN "Branch_test" i configured the Access VLAN to 425.

But the client don't get a IP from the 99.999.7.-Subnet. What do I wrong?

Thanks for any advise.

Kind regards
Tobias Hanschen

[dan_gallagher_k]

Hi Tobias,

In which case I would suggest it could either be one of the following:

1. ACL blocking
2. DHCP Helper address incorrectly applied
3. Inappropriate address pool configured on the DHCP server

You will need to check all these on your network.

Thanks,
Dan

[mark_dice]

The VPN should be decent and all the issues-free. The best thing to do here is self-education on the subject. You may want to read some reviews on VPN. This link is quite useful here.