Showing results for 
Search instead for 
Did you mean: 

WLAN Accesspoint DHCP over VPN

New Contributor II

I have a main office and a branch office connected via VPN.

In the main office I have a ZoneDirector 1112 with several Ruckus R500 Accesspoints in use.

Now i want to install a Ruckus R500 Accesspoint in the branch office.

I configured the firewall, to connect the Branch Accesspoint with the Zonedirector. This works.

But now, i have the problem, that the client gets no IP-Address from the DHCP-Server in the main office.

The DHCP-Server in the main office is in VLAN 1 on 99.999.1 - Subnet. The Zonedirector is in the 99.999.76.-Subnet. On the HP-Switch the VLAN 300 and VLAN 425 are tagged.

On the Zonedirector i have configured a WLAN-Group "Branch_WLAN" and a WLAN "Branch_Test". In the WLAN "Branch_test" i configured the Access VLAN to 425.

But the client don't get a IP from the 99.999.7.-Subnet. What do I wrong?

Thanks for any advise.

Kind regards
Tobias Hanschen

Image_ images_messages_5f91c3e0135b77e2478c3ebd_c5f63d0e523b5c0f02f89dc6955048f4_RackMultipart2018062515933xwb8-210a266f-e442-4ca9-9452-e5a4051350b3-251225319.jpg1529914422

New Contributor II
Hi Tobias,

In which case I would suggest it could either be one of the following:

1. ACL blocking
2. DHCP Helper address incorrectly applied
3. Inappropriate address pool configured on the DHCP server

You will need to check all these on your network.


New Contributor
The VPN should be decent and all the issues-free. The best thing to do here is self-education on the subject. You may want to read some reviews on VPN. This link is quite useful here.