cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Smart Zone -High Several AP firmware

ivan_gonzalez_g
New Contributor III
Hi,

In the platform Ruckus VSZ-H there is the possibility to load several firmware to support old AP(Example: ZF7343). In the literature says that each zone can have a firmware. Any information or link where you can find help.
Best Regards
16 REPLIES 16

andrew_somervil
New Contributor III
When you create a new AP Zone the third configuration item is the AP firmware. All available Firmwares are listed in a dropdown box and you select one. See following screenshot.

Image_ images_messages_5f91c423135b77e247981aaa_8d8f1ef7024707678030c0ee31c98439_RackMultipart201703031147531gs-e509d661-1104-4b6a-96b5-3ea4ee1c7694-1867390484.jpg1488549097

Andrew

ivan_gonzalez_g
New Contributor III
Hi,

As I do so that in this zone configuration, a firmware before this version appears, for example 3.1.2, this in order to recognize me as old APs like the ZF7343.

Thanks...

Image_ images_messages_5f91c423135b77e247981fdc_08c16bd2268e7996ade47ccf897a39d7_RackMultipart2017030311200442o-e5ad7603-91d8-4f42-b981-430e51e81954-1282104643.jpg1488550609

martin_martin
Valued Contributor
But remember this "older" version is only available when you upgraded from that version.
So If you fresh install 3.4.1.0.208 it will not include any previous versions.

Kind regards
martin

nicolas_maton
New Contributor III
According to our SE it's also limited to 4 versions.