I have one R510 AP and I want converted to standalone mode, I have reset it and connected via 192.168.0.1 on internet explorer and tried to upgraded from local but for the moment I face with this message and doesn't let me to upgrade from local
and I have also tried to upgrade online but again I face with this message:
Do you have any ideas or solution?
The AP current firmware is: 18.104.22.168.94
Thank you for sharing your experiences,
Thanks for contacting Ruckus. You can alternatively upgrade the AP from CLI using TFTP/FTP server.
Below is the KB article URL to refer.
Please let us know if you have any issues with the upgrading.
Thanks for your comment but again I face with this issue:
Thanks for the response. Please make sure your windows firewall is turned off and also the software image file is in the TFTP/FTP Root directory.
I am seeing some issues with the command as well and also making sure the software image file name is correct. For an example (upgrade via TFTP)
fw set host 10.10.10.10
fw set proto tftp
fw set port 69
fw set control R610_22.214.171.124.298.bl7
Please let us know if there are any issues.