Upgrading single R510 from Unleashed to standalone issue

[ghasem_ashjaei]

Hi Experts,

I have one R510 AP and I want converted to standalone mode, I have reset it and connected via 192.168.0.1 on internet explorer and tried to upgraded from local but for the moment I face with this message and doesn't let me to upgrade from local

and I have also tried to upgrade online but again I face with this message: 

Do you have any ideas or solution? 

The AP current firmware is: 200.7.10.202.94

Thank you for sharing your experiences,

Best

Ghasem

[ghasem_ashjaei]

Should I put the file source address ? 

I mean Like this:

fw set host 10.10.10.10 c:\file\1.bl7 ? 

when I tried to use ruckus(ap-mode)# fw set host 10.10.10.111 c:\file
ruckus(ap-mode)# 

There is no any error 

Tnx for your help 

[ghasem_ashjaei]

Hello again,

I put these command and I again I face this error: 

ruckus(ap-mode)# fw set control  10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw set proto tftp 10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw set port 69 10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw set control  10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw update

/bin/sh: can't create /etc/airespider-images/upgraded.fromver: Read-only file system
fw: Updating rcks_wlan.bkup ...
v54_fw_update: download fwupdate1.ruckuswireless.com section=rcks_fw.main image=Image2 ctl_file=r510_9991_cntrl.rcks (/writable/fw/main.cntl)
Error: net_get_buf- FW_CTL_ERROR
Error: net_get_buf- FW_CTL_ERROR
**fw(957) : CTL Get Error

ruckus(ap-mode)#

any idea? 

Best,

G

[Ratnadeep]

@ghasem_ashjaei

Hi Ghasem,

I would request you to please open up a case on our Support portal and one of our Engineers will assist you on remote to upgrade the AP.

[sanjay_kumar]

@ghasem_ashjaei 

Sorry if I missed this, any idea why there is a "c:\file\1.bl7" added at every command which you are entering on the CLI?

The format should be like below:

fw set host 10.10.10.10
fw set proto tftp
fw set port 69
fw set control <firmware file name>
fw update 
reboot

Not as 

ruckus(ap-mode)# fw set control  10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw set proto tftp 10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw set port 69 10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw set control  10.10.10.111 c:\file\R510.bl7

ruckus(ap-mode)# fw update

Note:

If the firmware file name is "R510.bl7, make sure you have this file copied on the root\shared folder of the TFTP server.

Regards,

Sanjay Kumar

[ghasem_ashjaei]

@sanjay_kumar 

@sanjay_kumar 

Hello and thank you for your note. 

As I mentioned before when I did like your command I face with this issue, while I checked everything ( FTP permission, turn off firewall and access write@& read and....  ) 

after putting the first command I face with this msg:

I don't know whats wrong with this. 😞 

ruckus(ap-mode)# fw set host 10.10.10.111
/bin/sh: can't create /etc/airespider-images/upgraded.fromver: Read-only file system
OK
ruckus(ap-mode)#