Unable to add Sonos Sub Gen3

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

I ran into an issue setting up Sonos Arc Sub and Surrounds. Sonos tech support mentioned that Ruckus access points convert multicast/broadcast traffic to unicast traffic, which disrupts expected Sonos behavior. Sonos requires multicast and broadcast traffic to be passed normally.

Please check link below for the following configuration for your Ruckus AP to allow the access points to pass multicast and broadcast traffic full time.
https://support.ruckuswireless.com/articles/000006140

How do I make these changes via Mac? Could someone explain if making the changes cause any other issue? thanks!

2 REPLIES 2