Hi, I am an engineer at KRFTSNAB ALC from the Republic of Belarus. We are the
first to test Ruckus products in the laboratory of our national
telecommunications operator Beltelecom. Help solve the problem with
DHCP Option 82 Remote ID Format.
Our Republican Wi-Fi network is built on Cisco Prime Infrastructure.
Here is an example of how a session report is generated when a subscriber connects through the Ruckus access point:
Fri Nov 9 12:19:34 2018
Acct-Session-Id = "15/0/1/533_039CF289"
Framed-Protocol = PPP
Cisco-Service-Info = "NINTERNET-FREE"
Cisco-AVPair = "parent-session-id=15/0/1/533_039CEB3D"
Acct-Input-Packets = 22640
Acct-Output-Packets = 28217
Acct-Input-Octets = 2076866
Acct-Output-Octets = 38086686
Cisco-Control-Info = "I0;2076866"
Cisco-Control-Info = "O0;38086686"
Framed-IP-Address = 100.97.33.16
User-Name = "375333646000@free"
Acct-Session-Time = 900
Acct-Terminate-Cause = Session-Timeout
Cisco-AVPair = "disc-cause-ext=Session Timeout"
Acct-Status-Type = Stop
Calling-Station-Id = "acc1.ee43.e079"
NAS-Port-Type = Ethernet
NAS-Port = 533
NAS-Port-Id = "15/0/1/533"
Cisco-AVPair = "vendor-class-id-tag=android-dhcp-6.0.1"
Cisco-AVPair = "circuit-id-tag=WLAN:wlan33:533:TestBELTELECOM2:R510:RuckusAP:34:8F:27:2B:30:50"
Cisco-AVPair =
"remote-id-tag=348f272b30503a5465737442454c54454c45434f4d32" Service-Type = Framed-User
NAS-IP-Address = 172.26.11.6
Event-Timestamp = "Nov 9 2018 12:19:34 +03"
NAS-Identifier = "a1k-wifi-2"
Acct-Delay-Time = 0
Acct-Unique-Session-Id = "a7f968bb77b7e91a"
Stripped-User-Name = "375333646000"
Realm = "free"
Timestamp = 1541755174
remote-id is not displayed correctly
This is how it should be displayed correctly:
Fri Nov 9 12:19:50 2018
Acct-Session-Id = "15/0/1/913_039C5EA0"
Cisco-Service-Info = "NINTERNET-UN"
Framed-Protocol = PPP
Framed-IP-Address = 100.105.207.210
Cisco-AVPair = "parent-session-id=15/0/1/913_039C5913"
User-Name = "
1760016388301@beltel.by"
Cisco-Control-Info = "I0;9246354"
Cisco-Control-Info = "O0;303569793"
Acct-Input-Packets = 92810
Acct-Output-Packets = 226940
Acct-Input-Octets = 9246354
Acct-Output-Octets = 303569793
Acct-Session-Time = 3638
Acct-Status-Type = Interim-Update
Calling-Station-Id = "241f.a0ad.fde1"
NAS-Port-Type = Ethernet
NAS-Port = 913
NAS-Port-Id = "15/0/1/913"
Cisco-AVPair = "circuit-id-tag=00000000"
Cisco-AVPair = "remote-id-tag=e8edf31ba050:BELTELECOM" Cisco-AVPair = "vendor-class-id-tag=dhcpcd-5.5.6"
Service-Type = Framed-User
NAS-IP-Address = 172.26.11.6
Event-Timestamp = "Nov 9 2018 12:19:50 +03"
NAS-Identifier = "a1k-wifi-2"
Acct-Delay-Time = 0
Acct-Unique-Session-Id = "c2d234f2ebfba5be"
Realm = "beltel.by"
Timestamp = 1541755190
I think the problem is in Hex format. For Cisco, you need to use ASCII, is it possible to enable this feature on the ZD 3000?
This is a very important part of testing that will allow you to sell Ruckus
products to expand the Wi Fi network in our country.