T710 / T750 thread positions & dimensions

[GreensTheorem]

Hi,

I need to build a custom bracket for a T710 and T750 access point.

Could you please provide a drawing of the hole / threads positions on the back of the T710 / T750 access point as well as the thread specifications?

Thanks!

[Ayush_Tripathi]

hello @GreensTheorem 

Please refer the below quick setup-guide for the T750 AP

https://support.ruckuswireless.com/documents/4359-ruckus-t750-strand-mount-bracket-quick-setup-guide...

For T710

https://support.ruckuswireless.com/documents/1125-ruckus-wireless-t710-quick-setup-guide

[GreensTheorem]

Hi @Ayush_Tripathi 

Those PDFs do not contain any drawings or specifications.

I can measure the positions myself, but that's more error prone, so if you could please be so kind and send me a drawing with the position and dimensions of the mounting holes on the back of the T710 and T750 AP?

Thank you 

[GreensTheorem · Accepted solution]

As Ruckus wasn't willing to help, I helped myself.

For anyone looking for those dimensions in the future:
The distance between the center points of the holes is 102x130mm

The threads are UNF 1/4" - 28

Pictures of the brackets: