cancel
Showing results for 
Search instead for 
Did you mean: 

T610 INSTALLATION HEIGHT

tehrhart
New Contributor

what would be an optimal height to have a t610 access point?  the t610 is being used in a warehouse, and currently sits on a printer table about 2 feet off the ground, and there is a freezer wall across the access point.  obviously the wall is causing an obstruction of the signal to the other non ruckus access points locate on the freezer warehouse  

1 REPLY 1

bruno_andrade
Internal Employee

Hi, optimal is closer as possible of your devices. Only a site survey can tell the best position for your APs.

But the good practice says you should install the APs below 50 feet.

Labels