cancel
Showing results for 
Search instead for 
Did you mean: 

Standalone R700 AP with DHCP issue

bar_chiu
New Contributor II
Hi everyone,

I'm done configuring an R700 AP as a standalone AP but I always get a different address - 169.254.27.89 with subnet mask of 255.255.0.0 - on my test phone from the configured pool of addresses.

The attached photos are the configurations on the concerned AP:

Image_ images_messages_5f91c3e4135b77e2478ce679_36289774e41059e20c8d66764e862561_RackMultipart2016011323881bk0s-43067051-5a40-497a-81dc-2c076b70cc69-245146848.png1452661773

Any help will be greatly appreciated.

Cheers
9 REPLIES 9

john_d
Valued Contributor II
It looks like on your third screen, "Packet Forward" is set to "Bridge to WAN" but you've set up a local subnet with an access VLAN. Perhaps you wanted to NAT to the subnet instead for that option?

Anusha_Vemula
Community Manager
Community Manager
Change the Packet Forward option to "Local Subnet NAT and route to WAN" and that should fix the issue.

- Anusha

thank Anusha VVL so much. I am fix the issue

bar_chiu
New Contributor II
This is odd but why do I get a different address on my test phone?


Image_ images_messages_5f91c41e135b77e24796f3da_32aa321a18f0ea99b4c01ec9a84e465b_RackMultipart20160114177801rq3-b4cc63d3-7e9b-4660-a9b3-e5913d89119e-1658280451.jpg1452737777