Standalone R700 AP with DHCP issue

[bar_chiu]

Hi everyone,

I'm done configuring an R700 AP as a standalone AP but I always get a different address - 169.254.27.89 with subnet mask of 255.255.0.0 - on my test phone from the configured pool of addresses.

The attached photos are the configurations on the concerned AP:



Any help will be greatly appreciated.

Cheers

[john_d]

It looks like on your third screen, "Packet Forward" is set to "Bridge to WAN" but you've set up a local subnet with an access VLAN. Perhaps you wanted to NAT to the subnet instead for that option?

[Anusha_Vemula]

Change the Packet Forward option to "Local Subnet NAT and route to WAN" and that should fix the issue.

- Anusha

[hung_nguyen_vie]

thank Anusha VVL so much. I am fix the issue

[bar_chiu]

This is odd but why do I get a different address on my test phone?