Speed Throttling

[abinav_devakar]

Recently purchased two R510 for my home connected through a gigabit switch to a router. Cat6 wiring all around. Connection speed is 200mbps. I am able to get 180mbps down when connected to the router. When i connect to the Ruckus, the speed seems to throttle exactly at 50mbps down. Any solutions ?

[abinav_devakar]

UPDATE: So I'm currently getting around 110Mb/s up and down on 2.4GHZ and 450Mb/s up and down on 5GHZ. Quite happy with the 5GHZ speed but still not able to figure out what I can do to improve the 2.4GHZ band. 

UPDATE2: So i finally managed to upgrade both the APs to the Unleashed firmware. I've created one as the Master AP and deployed a secondary AP and have only a single SSID. Now I'm getting a throughput of 350MB/s up and down which is the maximum of the 2.4GHZ band for the R510. How do I create a separate SSID with 5GHZ band to get its max throughout ?
UPDATE3:: So i found a way to use just 2.4GHZ only but then it goes back to 100Mb/s. Looks like it was using 5GHZ.