Hi all,
I've taken over management of four Ruckus 7341 Multimedia Hotzone Wireless APs over two separate sites (all Software Version 9.5.0.0.156)
Regardless of the roaming agressiveness we set on our Windows 7 wireless interfaces, the devices seem to excessively stick to an AP.
Without requiring a controller (ZD), I've heard mention of a Smart-Roam functionality (configurable via SSH/CLI), which causes the AP to pretend to go out of range - and force roaming: see
https://forums.ruckuswireless.com/ruckuswireless/topics/optimizing-client-switching-between-access-p...However, I can't see that the relevant CLI commands (set roam_enable, set roam_factor) are available.
Should these commands be configurable in Software Version 9.5.0.0.156?
Many thanks in advance,
IR8
