RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
06-28-2018 02:41 PM
05-15-2022 07:35 AM
Same issue here. Following
01-03-2019 04:32 PM
05-16-2022 01:33 AM
Hi Rodrigo,
The 'Island' SSID is broadcast by an AP that has already been provisioned on a controller network (e.g. Unleashed) and has lost connectivity with the network. Most often this is with an isolated Mesh AP.
Please see this knowledge base article for details on how to log in to the AP when it is in this state: https://support.ruckuswireless.com/articles/000011009
I hope that helps,
Darrel.
11-26-2023 11:44 AM
You might try to login to your AP, go to "Administration :: Management" and set "None" in the bottom section "TR 069 / SNMP Management Choice".
This seems to have done the trick for me.
