cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus Unleashed and vrrp setup

anton_kuzmin
New Contributor III
Hi! 
I have follow setup in my country house:
1) Fiber internet coming to garage
2) Backup LTE Huawei modem on my bedroom.
I have first mikrotik on Fiber enter, and second with LTE modem.
Also i deploy 4 ruckus unleashed ap (2-720, 1-610, 1-T310).
All working fine, but i want to setup redundacy -when my fiber chanel drops, transfer to LTE, and wise  a versa.
I found VRRP (virtual router) as a solution - it just change additional IP address on 1 or 2 router with special protocol - for example 192.168.1.254. 
So - 1 router initially has address 192.168.1.1  +192.168.1.254, second router has address 192.168.1.2. Gateway for network 192.168.1.254.
When fiber router down by some reason - situation changes, and 1 router has only 192.168.1.1, but second has 192.168.1.2 + 192.168.1.254.
This address transfer working fine, but only issue is rebuilding unleashed network while reboot router.
Actually i have wireless bridge by Ruckus between router 1 and router 2.
And when power down and restore - i have 2 separate unleashed network with main gateway 192.168.1.254. one - in segment of router 1, and second - in segment of router 2.
And issue that this 2 networks can't become one.
Is anybody meet same issue?
3 REPLIES 3