02-23-2023 12:03 AM
I want to ask I have connected to wireless router which is connected to the internet, an access point R650 unleashed version. Then I want to add another AP unleashed to, I already connected the AP to the same wireless router but the second AP is still not become slave. What should I do?
02-23-2023 01:55 AM
Please provide the below details-
Current unleashed firmware version-
What is the model of the AP you are trying to connect in unleashed controller-
Please make sure both the APs are getting the IP address in the same subnet/network
02-23-2023 06:56 PM
I'm using R650-188.8.131.52.202 version firmware. The AP slave and the main one are all R650.
Is it a problem to have a DHCP server for client and for AP in the same range and class? For example :
192.168.5.1 - 192.168.5.100 for AP and client.
Can you tell me where should I change if I want to make DHCP for slave AP?
I used another R650 in another network that is connected to a managed switch , and after setting the main AP I just set the slave's switch port to the same Vlan and create DHCP server in the switch. And it automatically added the slave AP when I connect a new AP R650 to the switch.
02-24-2023 02:03 AM
Master AP and member AP both needs to be in the same VLAN/Subnet, so the member APs automatically join the master in unleashed controller.
For Example if Master AP IP in range of 192.168.5.1 - 192.168.5.100, you need to add the member AP as well into the same IP range.
02-26-2023 07:13 PM
Can you tell me where do I need change the setting for member IP?