We have a refurbished R610 that I cannot get to connect to our existing ZD3000.
When I first plugged it in it was broadcasting a Configure.ME SSID - I connected to it successfully and upgraded it to the following firmware:
104.1.0.0.298
I can get to it using the https://192.168.0.1 IP address but I cannot get it to pull a DHCP address from our production network (same network/VLAN that the ZoneDirector is on).
Plugging a laptop in to the same exact port gets me a DHCP address right away.
PWR LED is flashing slow.
