03-21-2022 06:21 AM
We have a location with a bunch of Ruckus R610. Never have used a Ruckus before but I am trying to accomplish two things with them.
1) Do these have a web interface that you can access them? I am able to ping one of them via its IP address but when I try to go the IP in a web browser I get a message saying "The Connection Was Reset". Which again with me being a noob to Ruckus, makes me wonder if the R610s have a web interface.
which then leads me into my 2nd question...
2) I know with TP-Link and Ubiquiti they have a controller software you can download for the access points. That helps to manage them, make sure they are all setup correctly, etc. Does Ruckus have something similar? I see under the download section there is a device call Ruckus Unleashed but was hoping there was just a software we can install on a computer at that location.
03-22-2022 09:56 AM
Hi ,
Here are your answers inline.
1: Yes R610 have have a web interface, once your AP has an IP address you can access via https, ssh, you can refer this guide for quick setup.
https://support.ruckuswireless.com/documents/1420-r610-quick-setup-guide-qsg
if you have trouble login into the AP via web interface, try using a different web browser.
Share screenshot of any error.
or
login to the AP via SSH (using Putty or any other ssh tool).
Run below commands :-----
To view existing firmware on the AP( This will help you to determine which firmware image does the AP holds {Solo or Unleashed}, based on that you can decide next step)
#fw show all
To enable web access if failed to login in previous step
#set https enable
2: Yes we have a controller based software for APs i.e. Unleashed, which can be installed on the AP.
Latest unleashed Software.