Ruckus R610 and Controller Software and or Web GUI

[bluepoet]

We have a location with a bunch of Ruckus R610.  Never have used a Ruckus before but I am trying to accomplish two things with them. 

1) Do these have a web interface that you can access them?  I am able to ping one of them via its IP address but when I try to go the IP in a web browser I get a message saying "The Connection Was Reset".  Which again with me being a noob to Ruckus, makes me wonder if the R610s have a web interface. 

which then leads me into my 2nd question...

2) I know with TP-Link and Ubiquiti they have a controller software you can download for the access points.  That helps to manage them, make sure they are all setup correctly, etc.  Does Ruckus have something similar?  I see under the download section there is a device call Ruckus Unleashed but was hoping there was just a software we can install on a computer at that location.  

[vijaykuniyal]

Hi ,

Here are your answers inline.

1: Yes R610 have have a web interface, once your AP has an IP address you can access via https, ssh,  you can refer this guide for quick setup.

https://support.ruckuswireless.com/documents/1420-r610-quick-setup-guide-qsg

if you have trouble login into the AP via web interface, try using a different web browser.

Share screenshot of any error.

or

login to the AP via SSH (using Putty or any other ssh tool).

Run below commands :-----
To view existing firmware on the AP( This will help you to determine which firmware image does the AP holds {Solo or Unleashed}, based on that you can decide next step)
#fw show all

To enable web access if failed to login in previous step

#set https enable

2: Yes we have a controller based software for APs i.e. Unleashed, which can be installed on the AP.

Latest unleashed Software.

https://support.ruckuswireless.com/software/3242-ruckus-unleashed-ap-200-10-10-5-253-ga-refresh2-sof...