Hi Michael,
Thanks for the reply. The packet captures show pretty much what I was expecting, DHCP requests going out from the client, but nothing coming back;
Not working on LAN port with access VLAN same as wireless DHCP subnet;
![Image_ images_messages_5f91c43b135b77e2479d1084_420bfd6350acd6e33cb450ef2ba2bc18_RackMultipart201811229566jadd5-4c5ba21d-3716-4372-bd9d-44d5fb68a1f8-594196915.png1542878698 Image_ images_messages_5f91c43b135b77e2479d1084_420bfd6350acd6e33cb450ef2ba2bc18_RackMultipart201811229566jadd5-4c5ba21d-3716-4372-bd9d-44d5fb68a1f8-594196915.png1542878698](/t5/image/serverpage/image-id/1424i746C42765ED76720/image-size/large?v=v2&px=999)
Working on LAN port with access VLAN that exists on our network;
![Image_ images_messages_5f91c43b135b77e2479d1084_401bd38a39c8a471e3d4ca78df12a07d_RackMultipart201811221160072gb-2d015020-77a8-48c1-90d1-cf282fdaab3b-1133941053.png1542878778 Image_ images_messages_5f91c43b135b77e2479d1084_401bd38a39c8a471e3d4ca78df12a07d_RackMultipart201811221160072gb-2d015020-77a8-48c1-90d1-cf282fdaab3b-1133941053.png1542878778](/t5/image/serverpage/image-id/1425iCB252216FC755E2A/image-size/large?v=v2&px=999)
It seems as though the LAN ports are only passing traffic through the AP to the uplink port, and we can't get DHCP from the AP using the LAN ports?
Is there an official, this should or shouldn't work, for this? I can raise a support ticket if that's a better avenue to go down?
Thanks,
Chris.