cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus AP earthing

john_collins_82
New Contributor
I’m Looking for guidance from Ruckus on earthing of their Acccess points, Indoor and outdoor. I’m trying to find out what ruckus have designed the earthing terminals for on there access points. Is it for fault current protection? Static discharge? Over current protection? Surge protection to work in conjunction with an SPD on the Ethernet connection? Or possibly all the above? Is there any concerns for potential earth leakage (transient voltages from latent defects other electrical circuits) to cause potential faults to the antenna or internal circuitry. Look for any potential guidance possible.
1 REPLY 1

syamantakomer
Moderator
Moderator
Hi John,

It may be too late but you can utilize some information from below article.

https://support.ruckuswireless.com/articles/000006011

Regards,
Syamantak Omer
Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI
Labels