Ruckus AP command not recognized

[othmane_douiri_]

Hi Guys,

I am trying to connect a brand new Ruckus R500 v 100.0.0.0.127 to a virtual smartzone. however, the AP cannot join the vSZ, nothing in the vSZ's Event tab.
when I try the command 'set scg ip x.x.x.x' on the AP CLI, it returns 'command not recognized'. I tried with 'set director ip x.x.x.x' but the AP is still enable to join the vSZ.

- Does anybody knows why I have the message 'command not recognized'
- How can I troubelshoot this type of connectivity issues, I did not found anything on the vSZ's Event tab and I did not found the logs on the AP side.

Many thanks for your help

[seanmuir]

If AP is running on 100.x version, you should first give the "get director ip " command so that AP will upgrade its firmware to vSZ's and then give the set scg ip command which will make the AP to join the vSZ.

This incorrect.

You only need to issue:

set director ip X.X.X.X