cancel
Showing results for 
Search instead for 
Did you mean: 

R600 unable to find vSZ controller

peter_arnett
New Contributor III
Hello,

I have read through this link https://forums.ruckuswireless.com/ruckuswireless/topics/connect-r500-ap-to-cloud-vsz and made some changes that are described by Dionis, AlphaDog however am still unable to find my smartzone controller with my R600 access point. Other AP's such as the R610 and H320 are fine at discovering the vSZ using the command set scg ip x.x.x.x however the R600 doesn't have this command so am using set director ip x.x.x.x with no luck. discovery-agent is enabled on the AP.
I am a bit stuck as to what to do so any help would be greatly appreciated.
Thanks
9 REPLIES 9

monnat_systems
Valued Contributor II
pls confirm software version on the R600 AP. I believe you got the incorrect software version...

peter_arnett
New Contributor III
Hi its... 

rkscli: get version
Ruckus R600 Multimedia Hotzone Wireless AP
Version: 100.0.0.0.127
OK

peter_arnett
New Contributor III
This is controller settings that might be relevant...

LWAPP2SCG Configuration   
   --------------------------------------------------   
   ACL Policy                              : Accept all   
   Dynamic Data Transmission Port Range    : Not specified   
   NAT IP Translation in FTP Passive Mode  : No   
   ACL APs

also i disabled the passive mode and wondering if that is less secure.
Thanks