Ruckus AP R600 cannot be added to the ZoneDirector.

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

I have set up an R600 access point and pointed it to the wireless controller, but it still cannot be detected by the ZoneDirector. I tried to upgrade the AP firmware (version 10.2.1.0.159) to match the controller’s version, but I couldn’t find the firmware on the Ruckus website.

Details:
R600

IP Address: 10.64.25.31/24
Firmware Version: 3.5.0.0.1333

ZoneDirector 1200

IP Address: 10.64.1.32/24

Firmware Version: 10.2.1.0.159
License: No license has been imported
Support: No active support entitlement detected

ZoneDirector 3050

IP Address: 10.64.1.31/24

Firmware Version: 10.1.1.0.35
License: 75 AP Management (ACTIVE)
Support: Inactive

Question:
How can I add the R600 access point to the wireless controller?
Do I need to upgrade the R600 firmware, or is there another solution?

1 REPLY 1