Showing results for 
Search instead for 
Did you mean: 

Red Power LED after Upgrading 7055 Firmware

New Contributor

I recently update the firmware in a Ruckus 7055 AP to ver  Ever since, the power LED in the Access Point is solid Red after the AP has booted up.  With the old firmware, the Power LED was green after boot up.

Otherwise the AP seems to be working normally.  Does anyone have an explanation for this?


Community Admin
Community Admin

Hi Mike,

Constant red LED on power indicating some issue with hardware.

Try to factory reset the AP once. If you still face the same issue, proceed to open a support case and get the RMA done.

Syamantak Omer | Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

This evening I downgraded the 7055 to firmware ver  The power light is now green.