cancel
Showing results for 
Search instead for 
Did you mean: 

R750 firmware 6.1.1.0.1274 drops 2.4Ghz IoT devices

b8
New Contributor III

Upgraded vSZ to 6.1.1.0.959 and 3*R750 + 3 *R850 to firmware 6.1.1.0.1274

One specific IoT device based on an ESP32 drops offline from a 2.4Ghz network after 5 minutes due to 'inactivity' even though its constantly transmitting temperature and pressure data observable in both Wireshark and client devices.

Reverting to firmware 6.1.0.0.1595 prevents the issue from occurring. What information is needed to raise a ticket here? 

1 REPLY 1

bruno_andrade
RUCKUS Team Member

Hello b8.

Raise the ticket with this information in the description, also download the support log from one AP two times. One with the IoT devices connected and other soon after they are disconnected. Then attach both support log in the case.

Here is the procedure to download the support log:

https://support.ruckuswireless.com/articles/000003759

 

Bruno Andrade | Principal TSE Bulldog Americas | RCNA | CWNA | CWDP
Follow me on LinkedIn