R720 802.3bt support

[michael_liu_cea]

I have read conflicting information (datasheets) on whether or not R720 supports 802.3bt.  Can someone verify if R720 indeed supports 802.3bt?

[sanjay_kumar]

Hi CVCCSI,

Yes, that is correct. Use the below command if you want to set\check the power mode on the AP CLI.

rkscli: set power-mode at+
rkscli: get power-mode

[michael_liu_cea]

Thanks for the reply. 

Another issue to verify. 802.3bt comes either as Type 3 or 4, do I need to get type 4 since I've read that R720 only uses 2 twisted pairs for power and type 3 only supports 30W for two twisted pair while type 4 supports more?

Thanks again.