R720 802.3bt support

[michael_liu_cea]

I have read conflicting information (datasheets) on whether or not R720 supports 802.3bt.  Can someone verify if R720 indeed supports 802.3bt?

[abilashpr]

Hi CVCCSI,

Below are the Max power drawn by AP R720 and its operating characteristics.


Below is the ICX Switch allocated power for R720



Below is the POE Support for different Model APs.


Hope it helps!!!

Regards,
Abilash PR.

 

[michael_liu_cea]

Hi Abi,

Thanks for the info.  I went over that information already.

Below are two links that has R720 with 802.3bt support along with PoH/UPoE, Injector and 48VDC for full power.

https://docs.arris.com/bundle/ap-110.0-indooruserguide/page/GUID-8E8F8B00-6F53-41CA-89CA-6BD1EAC001F...

https://www.dellemc.com/resources/en-us/asset/data-sheets/products/networking/Dell_EMC_Networking_Ru...

Thanks.

[abilashpr]

Hi CVCCSI,

R720 require 33.5W, if I have a 802.3bt poe capable switch I would manually set the power limit in this case. Is there anything in particular that you are looking ?

Regards,
Abilash PR.

[michael_liu_cea]

So manually set POE to 802.3at+ on r720 will get me the 33.5w needed to run at full power with a 802.3bt POE switch?