R710 AP image for vSZ carrier

[randy_rosario]

Where to download or get the AP image for R710 to be recognize by vSZ carrier?

[kieran_oakes]

You would need to contact Ruckus Support, I had this exact same issue yesterday and they promptly sent me the correct firmware.

[dionis_taveras]

The R710 is supported in release version 3.1.1 which can be downloaded from the support website at support.ruckuswireless.com or as mentioned by Kieran, you can contact support and a copy of this image can be sent to you.

Regards,

[michael_brado]

And here are helpful instructions to connect a new AP to the vSZ / SZ-100 platform.

https://support.ruckuswireless.com/answers/000004230

[michael_brado]

And the base image firmware (will join either ZD or SCG-200/vSZ/SZ-100 platforms, and auto-upgrade firmware from controller),
is version 100.2.0.0.336:

https://support.ruckuswireless.com/software/760-standalone-ap-software-100-2-0-0-336-r710