cancel
Showing results for 
Search instead for 
Did you mean: 

R500

araba_emile_kon
New Contributor

Hello,
I am trying to load a firmware 500 version 200.7.10.102.64 but the upgrate interface does not work. How could I load the ap via tftp?

1 ACCEPTED SOLUTION

vijaykuniyal
RUCKUS Team Member

Hi @araba_emile_kone,

You can use below commands to upgrade the firmware from cli using TFTP.

#fw set host <TFTP server IP address> 
#fw set proto tftp
#fw set port 69
#fw set control <image file name>
#fw update 

Once image is update, reboot AP with reboot command.

#reboot
Vijay Kuniyal

Staff Technical Support Engineer

CCNA RnS | CCNA Wireless | CWNA | RASZA | Meraki CMNO | RACPA

View solution in original post

5 REPLIES 5

david_black_594
Contributor III

Have you tried a different browser?  Firefox usually works best with Unleashed.

@david_black_5940365

@araba_emile_kone 

Exactly, you need to use firefox. 

vijaykuniyal
RUCKUS Team Member

Hi @araba_emile_kone,

You can use below commands to upgrade the firmware from cli using TFTP.

#fw set host <TFTP server IP address> 
#fw set proto tftp
#fw set port 69
#fw set control <image file name>
#fw update 

Once image is update, reboot AP with reboot command.

#reboot
Vijay Kuniyal

Staff Technical Support Engineer

CCNA RnS | CCNA Wireless | CWNA | RASZA | Meraki CMNO | RACPA

begine
New Contributor

hello..

I have ZD1200 with Version:10.2.0.0 build 189 and I have R500 APs, which firmware of R500 is compatible with this version of ZA?

 

Thanx