cancel
Showing results for 
Search instead for 
Did you mean: 

R310ap unleshed to standalone

jerry1
New Contributor

Hi

I have a question 

I have an unleashed R310 AP. I want to set up standalone.  I have a IndoorAP-100_1_0_0_432 (rcks_fw_H500_100_1_0_0_432.bl7)  It needs to be converted to standalone.
Please tell me how to set it up.

ap name: zoneflex r310 access point 

1 ACCEPTED SOLUTION

Dickson
RUCKUS Team Member

Hello Jerry,

Please download the software at our support website and look for.
Ruckus Solo Access Point 110.0.0.0.2014 (GA Refresh2) Software Release (R310)

Please check RUCKUS Access Point Getting Started Guide on our support website. 

You can load the firmware on the UI in the started guide.

Thanks,

Dickson

View solution in original post

4 REPLIES 4

Dickson
RUCKUS Team Member

Hello Jerry,

Please download the software at our support website and look for.
Ruckus Solo Access Point 110.0.0.0.2014 (GA Refresh2) Software Release (R310)

Please check RUCKUS Access Point Getting Started Guide on our support website. 

You can load the firmware on the UI in the started guide.

Thanks,

Dickson

jerry1
New Contributor

Let me ask you again. Sir

I asked you how to ap from unleashed to standalone The link you sent me is the standalone setting from the beginning. 

Dickson
RUCKUS Team Member

Alright. Please refer to article: 000005193

Thanks,

Dickson

jerry1
New Contributor

Thank you sir