Showing results for 
Search instead for 
Did you mean: 

P2P 7731 good signal, good speed flex, terrible speed tests

New Contributor
I have a P2P bridge setup with two 7731s. Everything has been working well for some time but just recently we have had issues with IP phones crackling and dropping over the connection. I did a channel optimizer and the signal shows stronger than previous and is on a different channel. The ruckus speed test shows about 60/60 with 0 packet loss. When I run a speed test from the remote site I only get about 20/20. On the primary site I am getting 90/90. Is there that much overhead that would cause me to drop that much?