Old WinCE clients on T300 with later firmware

[bruce_richardso]

Hi,

I have had this issue for a while, after upgrading to a later version of the firmware. Older WinCE clients on 2.4GHz seem to drop off the network and do not come back. This only seems to affect T300 APs, that's the only outdoor APs we have. Our indoor APs (R650 etc) seem not to be affected.  The clients are barcode scanners with Sumit WiFi cards that are old but not likely to be replaced very soon. 

5.2.1.0.1038 seems to be OK. But anything later causes problems. 

Is this a know issue?

Thanks

Bruce

[Parik_MN]

Hello @bruce_richardso, 

The symptoms sounds like a known issue in firmware 5.2.2. We already have a fix build to address that issue. Please feel free to report a case. We would share the fix build with you.

Regards,

Parik

[bruce_richardso]

Thanks Parik, I will open a case

[bruce_richardso]

Case ID: 01391410